1. 1 vs 1, 1 vs 2, 1 vs 3, 1 vs 4, 1 vs 5, 1 vs 6, 1 vs 7, 1 vs 8

2. 2 vs 2, 2 vs 3, 2 vs 4, 2 vs 5, 2 vs 6, 2 vs 7, 2 vs 8

3. 3 vs 3, 3 vs 4, 3 vs 5, 3 vs 6, 3 vs 7, 3 vs 8

4. 4 vs 4, 4 vs 5, 4 vs 6, 4 vs 7, 4 vs 8

5. 5 vs 5, 5 vs 6, 5 vs 7, 5 vs 8

6. 6 vs 6, 6 vs 7, 6 vs 8

7. 7 vs 7, 7 vs 8

8. 8 vs 8

※ The maximum speed of the equipment can reach 1200 pieces per hour (depending on the product).

※ Equipped with an intelligent crimping machine: a terminal crimping machine that can set 2 different crimping heights (allowing two wires of different diameters to be crimped into the same terminal).

※ CCD core wire detection: Detect the number of core wires, and check if there are any missing core wires.

※ CCD stripping detection: Stripping length, presence of foreign objects in the stripping, stripping dispersion, waterproof plug position, and the front and back of the waterproof plug.

※ CCD terminal detection: Terminal appearance, deep or shallow crimping, improper crimp barrel closure, loose wires, wire color, etc.

※ Pressure force detection: Monitor the crimping process.

※ Raw material confirmation function: Includes terminals, wires, waterproof plugs, and molds. They are loaded through scanning comparison to ensure the accuracy of raw material usage.

※ Open wire measurement function: Equipped with an encoder for measurement, real-time monitoring of the open wire length, and real-time correction of the open wire length.

※ MES data collection: Includes open wire length, terminal crimping data, CCD detection images, etc. These data can be uploaded to the server and permanently saved.

※ MES data traceability: Through the printing of barcodes, each wiring harness has an independent code. By using a barcode scanner, each data in the production process of the wiring harness can be retrieved with one click, which is very convenient for traceability.

※ Quick change function, significantly shortens the changeover time, flexibly responds to multiple batches and small batches of orders, and significantly improves the equipment's operating rate.

Parameters

Power supply: AC 380V 50/60Hz（TN-S）

Air pressure:5-6 kgf (Requires clean air)

Power:10KV

Function:Wire cutting, one side stripping, two sides stripping, waterproof plug insertion, one side crimping, two sides crimping, compression (ultrasonic welding), insertion of heat shrink tubing, heat shrinking of heat shrink tubing

Quality detection:wire presence, wire connectors, terminal presence, pressure management system, CCD core wire detection, CCD stripping head detection, CCD waterproof plug position detection, CCD terminal appearance detection system

Processing wire range:0.13mm²-4.0mm²(AMG26-AMG11)

Wire color:36 colors

Production Capacity:1200 pcs/hour (depending on product specifications) 

Pipe specification: Medium 2.0mm, Medium 6.0mm

Heat shrink tube length: 15mm - 50mm

Cutting accuracy:1mm + cutting length × less than 0.1%

Cutting length:150mm-999mm

Peeling length:0-20mm

Pressing capacity:2.5TON servo worm drive machine (It can be equipped with 2 to 12 units according to customer requirements)

Applicable molds:30mm stroke die, 40mm stroke die

Waterproof plug:It can be installed with 1 to 6 units according to customer requirements.

Size:6500*2100*1800mm(excluding protruding parts)

Repetitive function: Crimping Machine (up to 12 units available), waterproof plug (up to 6 units available), laser-printed number tube, heat shrink tubing insertion, ultrasonic welding station